STM-1 over GE (IP) - SDH over IP Multiplexer

Products >> Media Converters & Optical Multiplexer >> Optical Multiplexer >> STM-1 over GE (IP) - SDH over IP Multiplexer

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-STM-1 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1xSTM-1(63 E1/VC-12) over GE port.

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-STM-1 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1xSTM-1(63 E1/VC-12) over GE port.

As a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-STM-1 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1xSTM-1(63 E1/VC-12) over GE port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports.

State-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.

AN-TDM-IP-STM-1 has 2 power slots, 1 STM-1 slot1 GE uplink slot and 1 External clock interface slot.

AN-TDM-IP-STM-1 can aggregate 63 E1 over IP remote services to 1 STM-1 port. Remote CPEs could be other members in TDM Over IP family such as AN-TDM-IP-16E1, AN-TDM-IP-8E1, AN-TDM-IP-4E1, AN-TDM-IP-E1, AN-TDM-IP-2E1 etc. to run legacy E1 services. Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of services over their packet-switched infrastructure.

Features

  • Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
  • Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, Anyone of 5 GE electrical ports may act as NM port
  • User-friendly Web server supported for easy setup and maintenance
  • Support SNMP V1/V2 network management
  • STM-1 card has 2 port, support local clock, STM-1 line clock and external clock.
  • Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based、8021.1P based、MAC based and TOS based).
  • Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning
  • Ethernet packet size up to 9720byte
  • Point to point and point to multipoint supported
  • Local Ethernet port throughput limiting
  • Software and hardware online upgrade
  • Power supply redundancy

Item 

 

Description 

Model 

AN-TDM-IP-STM-1 

2 PWR slots 1 STM-1 slot 1 Ethernet uplink slot 1 External clock interface 

Service card 

Ethernet uplink card  

5 GE electrical ports and 1 GE optical port Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x Speed and duplex auto-negotiation or manual 

Service card 

STM-1 card 

2 port Default SC/PC 

Power 

Supply 

2 power slots AC 220v power module AC 110v power module DC -48v power module 

Power 

Consumption 

≤40W 

Working Environment 

Temperature 

0~ 50C 

Working Environment 

Relative Humidity 

≤90% (non-condensing) 

Dimension 

W x H x D (mm): 

1U: 440 x 44 x 231 (mm)