AN-miniSDH

Products >> Media Converters & Optical Multiplexer >> Optical Multiplexer >> AN-miniSDH

AN-miniSDH

AN-miniSDH is a carrier-class, cost-effective, compact (only 1U high) SDH/MSPP platform

AN-miniSDH is a carrier-class, cost-effective, compact (only 1U high) SDH/MSPP platform

As a key member of AD-net SDH/MSPP Product family, AN-miniSDH is a carrier-class, cost-effective, compact (only 1U high) SDH/MSPP platform that is designed for applications in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.

AN-miniSDH is a modularized unit with 4 universal slots, supporting different interface cards, such as STM-1 fiber optic cards, E1 cards, Ethernet cards (EoS VCAT), and V.35 card. The main board cross-connect capacity is 504—504 VC-12s (8—8 VC-4s), allowing non-blocking adding/dropping services among different interfaces. It supports the hybrid transmission of SDH, PDH, Ethernet and N—64K V.35 services within the same equipment. With the large capacity cross-connect matrix, the AN-miniSDH can be configured as ADM, TM, and REG. It is suitable for multiple network topologies such as point-to-point, chain, ring, hub, and mesh networks

Features

  • 4 General Slots, supporting a range of interface cards, including SDH, PDH, Ethernet, and V.35 cards.
  • Ethernet service supporting GFP encapsulation, VC12 virtual concatenation (1~63 VC12)
  • Large cross-connect matrix capacity is 504 504 VC-12s (8 8 VC-4s) and powerful networking ability
  • LCD display for system configuration and alarm
  • Inter-working with popular SDH/MSPP products of various vendors
  • Suitable for 3G access network transmission
  • Easy commissioning and maintenance
  • High integration, compact design
  • High reliability, low CAPEX and OPEX

Index 

Index 

Performance Parameter 

SDH Interface 

Max 

8 STM-1 optical interfaces - Four AN-M-SDH-2-STM1- cards used 

SDH Interface 

Connector  

SC/PC 

SDH Interface 

Spec. 

S-1.1, L-1.1, L-1.2 

SDH Interface 

Spec. 

Single fiber bi-directional interface can be optionally supported 

Service Card (4 General Slots) 

AN-M-SDH-1-STM1 

Single STM-1 optical interface card 

Service Card (4 General Slots) 

AN-M-SDH-2-STM1 

Dual STM-1 optical interfaces card 

Service Card (4 General Slots) 

AN-M-SDH-4E1-75 

4 E1 interface card (75W) 

Service Card (4 General Slots) 

AN-M-SDH-8E1-120 

8 E1 interface card (75W or 120W) 

Service Card (4 General Slots) 

AN-M-SDH-2ETH 

2 FE interface card (2 FEs over a single virtual concatenation channel) 

Service Card (4 General Slots) 

AN-M-SDH-4ETH 

4 FE interface card (4 FE interface over 4 independent virtual concatenation channels) NOW AVAILABLE WITH FX fiber interface!  

Service Card (4 General Slots) 

AN-M-SDH-2V35 

2 V.35 framed interface card (Nx64k) 

PDH interface 

E1 Spec. 

Comply with G.703, 2.048Mbps, HDB3 

PDH interface 

Max E1 

24E1 (three 8XE1 cards support) 

Ethernet 

Interface 

10/100Base-Tx, Comply with IEEE 802.3 

Ethernet 

Max FE Interface 

12 FE (three 4xFE cards support) 

Ethernet 

Encapsulation 

Comply with ITU-T G.7041 (GFP) 

V.35 

Max Interface 

6 V.35 interfaces (n 64K) DCE/DTE 

Cross-connect Capacity 

Low order VC12 

504 504 VC12 

Management 

Protocol 

SNMP or Q3 

Management 

Interface 

10Base-T and RS232 RS485 

EOW interface 

EOW interface 

Standard socket RJ11 

LCD Display 

LCD Display 

Supported 

Physical Dimension 

Physical Dimension 

1U: 440 44 230 (mm) 

Power  

Supply 

-48V DC or 220V AC or dual power supply +24VDC 

Power  

Supply 

Consumption 15 W 

Environment 

Temperature 

5C - 45C 

Environment 

Humidity