ONT C524W

Products >> FTTH & IPDSLAM >> ONT >> ONT C524W

ONT-C524W

  • C524W 4 x 10/100Base-Tx ports
  • 2 x FXS ports for VoIP
  • IEEE 802.11 b/g/n WiFi

C524W 4 x 10/100Base-Tx ports

  • 2 x FXS ports for VoIP
  • IEEE 802.11 b/g/n WiFi

The C524W is an EPON Optical Network Terminal designed for SFU (Single Family Unit) used in home and small office environment. It provides subscriber with rich, individualized, and comfortable triple-play services including video (IPTV), voice and high speed internet access. It has a glossy appearance and green, energy-saving advantage.

It supports 4 Fast Ethernet (UTP, RJ45) ports, 2 FXS (RJ 11) ports, and Wi-Fi (802.11 b/g/n) interface to the subscriber. It is connected to GEPON OLT and RN (Remote Node) via a fiber optic cable to provide TPS (Triple Play Service).

By adopting the state-of-the-art E-PON technology, C524W supports various features including Quality of Service (QoS) function, management function enabling prompt reactions against the problems in the system or a subscriber line, security function protecting subscriber information safe, and subscriber management function sheltering user information from illegal users.

Features

  • 4FE Downlink Interface
  • 2 FXS Telephone Line(RJ-11) Interface for VoIP service
  • Wireless LAN (802.11b/g/n)
  • NAT/NAPT
  • DHCP Function
  • Multicast Function
  • QoS Features
  • IPv4/IPv6 Compatibility
  • Maximum 1514 byte Ethernet frame (without VLAN)
  • 128 MAC address learning for R end in FTTC scenario.
  • Compliant with 1000BASE-PX10 according to YD/T 1475-2006 - EPON.
  • Uplink throughput: no less than 360Mbps.
  • Downlink throughput: 380Mbps.
  • ONU queue priority: no less than 4.
  • Power consumption: less than 12W

Network Features

  • Wire-speed WAN and LAN
  • Full-duplex Mode WAN and LAN
  • Auto MDI/MDIX (Medium Dependent Interface Cross) WAN and LAN
  • IEEE 802.1q VLAN(Tagged, untagged by port) for WAN port
  • Maximum 16 Active VLAN
  • VLAN ID range of 1~4094
  • 4K MAC Address

Multicast Features

  • IGMPv2
  • IGMPv3
  • IGMP Snooping
  • IGMP Join/Leave Suppression
  • IGMP Fast Leave
  • IGMP Proxy
  • 32 Multicast Group entry
  • Multicast throughput: 400M.
  • Multicast delay < 1.5ms。
  • Multicast address capacity: no less than 8.

VoIP Features

  • G.711A/u, G.729, G.723, G.722 etc.
  • T.38 Fax
  • Support different signals: dialing tone, ring back tone, etc.
  • Support SIP
  • Support MGCP
  • RTP / RTCP Support RFC 3550 & RFC 3551
  • Support call waiting
  • Support call holding
  • Support call forwarding
  • Three Party Service
  • Support caller ID display (Type 1 and 2)
  • Support DTMF

DHCP Feature

  • DHCP Client
  • DHCP Server
  • In NAT mode, IP will be assigned from the IP Pool of the device, and in Bridge mode, the IP will be assigned from the DHCP server in the network

NAT/NAPT

  • Selectable between NAT mode and bridge mode
  • Dynamic/static private IP in NAT mode
  • Wire-speed for bi-directional packets of more than 256 Byte in NAT/NAPT
  • Port Forwarding and DMZ Host function
  • Minimum 500 bi-directional concurrent sessions

QoS Feature

  • Rate limiting (10%)
  • QoS for both upstream and downstream

Security

  • Broadcast storm control
  • MAC filtering

WiFi Features

  • IEEE 802.11b/g/n
  • Functional condition
  • Automatic Fallback
  • 4-level adjustable channel Transmission Output
  • Manual or automatic selectable channel
  • Setting and changing of number of CPEs that can access at one time
  • Mixed use of 802.11b, 802.11g, 802.11n
  • Encryption (Keys such as Hex, ASCII, special character should be supported)
  • 64/128bit Static WEP Key
  • WPA
  • WPA2
  • WPA-PSK
  • WPA-PSK2(Option)
  • 4 or more Virtual AP (Multi SSID), and each SSID supports different encryption
  • SSID should support alphabet, numeric, special character
  • Hidden SSID
  • Wireless LAN QoS function: IEEE 802.11e(WMM)
  • Traffic classification by 802.1p and DSCP field value
  • IEEE 802.1x
  • EAP MD5/EAP TTLS
  • PEAP
  • RADIUS Client function
  • TR-069
  • Session Timeout function.
  • Upon re-authentication due to Session Timeout, it should be managed by the same Session ID
  • Idle Timeout
  • Session Timeout value and Idle Timeout value shall be obtained from Authentication system
  • Web Redirection upon authentication failure
  • Session termination upon wireless link down
  • Account termination transmission function

Operating & Management

  • OAM
  • System or module LED.
  • SNMP v1, v2 MIB.
  • Memory structure that allows to save or modify Configuration File
  • Memory should keep the contents of the memory even when power supply is stopped.
  • Local and remote Firmware Upgrade (The existing Image should be kept when upgrade fails).
  • Normal session for system management even when CPU overload
  • Remote Management
  • Remote access through Telnet(RFC 854, 855)
  • CPE Management Server
  • Device Reset
  • LAN port reset
  • Setting and changing Config
  • Firmware download only through Web Server by TR069
  • VLAN ID change
  • MAC Filtering
  • Time sync through NTP Server
  • Device status and performance management

Item 

 

Description 

Type 

 

Standalone type 

Interface 

PON 

Standalone type 

Interface 

LAN 

10/100BaseTx (RJ-45: 4 ports), MDI/MDIX Auto-Negotiation 

Interface 

VoIP 

FXS Interface(RJ-11: 2 ports) 

Interface 

Power Switch 

On/Off 

Interface 

Power(DC) 

DC 12V 1.5A 

Interface 

Reset Switch 

Reset to factory 

Interface 

WPS Switch 

Wi-Fi Protected Setup 

Interface 

ANT 

Fixed Wireless LAN Antenna 

Front Panel LED 

Power 

Power On/Off status 

Front Panel LED 

PON 

Logical Link status of PON, Loss Of Signal 

Front Panel LED 

DATA 

PON Link and Data Transmission status 

Front Panel LED 

LAN 1/2/3/4 

LAN Link and Data Transmission status 

Front Panel LED 

VoIP 

VoIP Link and Voice Call status 

Front Panel LED 

Wireless 

WLAN Link and Data Transmission status 

Front Panel LED 

TEL 1/2 

VoIP Link and Voice Call Status 

Accessories 

 

UTP Cat.5 Ethernet Cable(RJ-45, Straight) Power Adaptor (Input - AC: 100 ~ 220V ( 20%)) User Manual 

Item 

Detail 

Remark 

Classification 

Physical port 802.1p SRC/DST IP address TOS/DSCP TCP/UDP SRC/DST port 

Layer 1, 2, 3, 4 

Marking 

802.1p DSCP 

Layer 2, 3 

Scheduling 

SPQ 

3 Queues per interface 

Acct-Terminate-Cause 

Value 

Description 

User Request 

User logoff 

Lost Carrier 

Wireless link down for specific time period 

Lost Service 

When the previous AP sends Acct-stop in roaming mode 

Idle Timeout 

Idle Timeout termination 

Session Timeout 

Session Timeout termination 

Admin Reset 

When admin stops specific Session 

Admin Reboot 

When admin reboots the AP 

Name 

Spec. 

Description 

ON/OFF 

 

Power On / Off 

Power Jack DC 5V2A 

 

The input terminal that a power adaptor is connected to. 

LAN 1/2/3/4 

RJ-45 

Connected through a LAN port UTP cable. 

TEL 1/2 

RJ-11 

Connected through a FXS port RJ-11 cable. 

WiFi  

802.11b/g/n 

Wi-Fi Interface with WPS button (Optional)  

Line 

SC/APC 

EPON port (need to be kept clean)