ONT C501K

Products >> FTTH & IPDSLAM >> ONT >> ONT C501K

ONT-C501K

  • GE-PON ONT C501K One port Gigabit Ethernet for downstream
  • Bridge mode operation
  • Multicast Support for IPTV Service

GE-PON ONT C501K One port Gigabit Ethernet for downstream

  • Bridge mode operation
  • Multicast Support for IPTV Service
  • LD Shutdown Function when ONT occurs the fault. (Automatic Shutdown Function)
  • QoS Features
  • IPv4/IPv6 Compatibility
  • Compliant with 1000BASE-PX10 according to YD/T 1475-2006-EPON.
  • ONU queue priority: no less than 4.
  • Low Power consumption: less than 5W

The C501K is a versatile, high-speed optical network terminal modem based on GEPON technology for home and the small office. It supports one port Gigabit Ethernet interfaces so that subscriber enjoys ultra high speed internet through their wired connection client such as computer and any home gateway modem supporting Wi-Fi or VoIP FXS interface. Connected to GEPON OLT via fiber optic cable, C501K provides seamless triple play service to their subscribers as a means of new service revenue chain. 

The C501K delivers cost-effective and efficient triple play services to FTTH users through PON access over single fiver core so that operator reduce the CAPEX and OPEX at lowest among fiber network technologies.

In addition, the C501K provides web-based management application for easy and quick operation and efficient maintenance. By connecting ubiQuoss OLT system, the C501K supports the effective and efficient capabilities for administration, provisioning, and O&M which are essential for operator’s service management.

C501K, installed in an apartment, an office or a house, is connected to the IP terminal devices such as a subscriber’s home-gateway modem, PC, laptop and provides broadband access service.

Adopting the state-of-the-art technology, C501K supports various functions, superior to those of the existing Ethernet switch, including Quality of Service (QoS) function, management function that allows to take prompt actions against the problems in the system and a subscriber line, security function that secures subscriber information safely, and subscriber management function that secures a user’s right from illegal users such as crackers. Up to thirty two C501K connections per one GEPON port from OLT, furthermore, it shares the data of 1.25Gbps with one optic line of 802.11ah GE-PON interface through passive optical distribution device which is a splitter.

GE-PON ONT C501K

  • One port Gigabit Ethernet for downstream
  • Bridge mode operation
  • Multicast Support for IPTV Service
  • LD Shutdown Function when ONT occurs the fault. (Automatic Shutdown Function)
  • QoS Features
  • IPv4/IPv6 Compatibility
  • Compliant with 1000BASE-PX10 according to YD/T 1475-2006-EPON.
  • ONU queue priority: no less than 4.
  • Low Power consumption: less than 5W

Item  

 

Description  

Standard 

 

IEEE 802.3ah 

System Architecture 

Type 

Desktop 

System Architecture 

Size (mm) 

180(W) x 135(D) x 40(H) 

Power 

 

Input: 110~220 V 15%, 60 3Hz Output: +5V, 2A (power adaptor used) Consumption: Max 5.0W (typical: 4W) 

Available Interface 

Management Interface 

1 Console Interface (Via Console Board) 

Available Interface 

PON interface 

1 1.25G 1000Base-PX, 1 Core SMF 

Available Interface 

User interface 

One Port 10/100/1000base-Tx (IEEE 802.3u) 

Environmental Condition 

 

- Operating Temperature/humidity: 0~50℃, humidity: 20~90% - Storage Temperature/humidity: -30℃~60℃/10%~90% - In compliance with EMI/EMC Class B 

Function and Performance 

EPON  

- IEEE802.3ah MPCP, OAM compliant - 802.1Q VLAN - Per LLID Filtering/Classification - Supports up to four Logical Link IDs (LLID) - AES-128 Downstream decryption - Dying Gasp - Automatic Plug and Play function for WAN PON Port (Discovery and Authorization)  

Function and Performance 

L2 Features 

- IEEE802.1Q VLAN - IEEE802.1D Spanning Tree Protocol 

Function and Performance 

PPPoE 

- PPPoE (RFC 2516) - Support AUTO, PAP, CHAP, MS-CHAP authentication - Added static IP address assignment. 

Function and Performance 

Multicasting 

IGMP v1/v2, IGMP proxy/snooping for IPTV service 

Function and Performance 

QoS 

- IEEE802.1P - Packet classification and marking (802.1P) - Rate limiting 

Function and Performance 

Security & filtering 

- MAC address limiting 

System Operation and Maintenance 

LD Shutdown Function 

- Support the LD shutdown function so that OLT detects any ONTs working in continuous mode and turn off (shutdown) the laser diode of the ONT to prevent service failure over PON network - OLT forces to turn off the malfunctioning ONT by checking continuous mode on laser diode of ONT to block its burst operation. (Optional) 

Physical Characteristics 

Optical characteristics 

- Transmission distance: 10Km or 20Km(Optional) - Transmission quality: BER 10-10 or lower - Transmission level : -1~4dBm 

Physical Characteristics 

Dielectric resistance 

100Mohm or higher (based on DC 500V) 

Physical Characteristics 

Low power function  

Supports the power saving mode. (Max 5W)  

Technical Standard and Protocol 

 

- IEEE Std 802.3-2002 Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - IEEE Std 802.1D, 1998 Edition Media Access Control (MAC) Bridges - IEEE Std 802.1Q, 2003Edition Virtual Bridged Local Area Networks - IEEE Std 802.1w-2001 Media Access Control (MAC) Bridges Amendment 2: Rapid Reconfiguration - IEEE Std 802.1s-2002 Virtual Bridged Local Area Networks Amendment 3: Multiple Spanning Trees - IEEE Std 802.1X-2001 Port-Based Network Access Control - IEEE Std 802.3ah.-2004 Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Amendment: - Media Access Control Parameters, Physical Layers, and Management Parameters for Subscriber Access Networks - IEEE P802.1ad/D6.0 Draft Standard for Local and Metropolitan Area Networks Virtual - Bridged Local Area Networks Amendment 4: Provider Bridges